Products
TDC-EB series DC leakage current sensor is a series of new device developed according to principle of electromagnetic induction. Its low current is stable. It is highly insulating between its primary coil and secondary coil. This sensor is used to measure current of signal system, circuit, and leakage monitoring system, as well as to measure current difference. The TDC-EBseries sensor has rated input current between 10mA and 50mA,meansure range upto 75mA. It has 1% accuracy, very reliable. Available for appearance customization.
Technology :
Magnetically ModulatedMax. Nominal Value :
±50mAMax. Measuring Range :
±75mAOutput Signal :
±5VSupply Voltage :
±12--±15±5%Accuracy :
1%Op. Temperature :
-40 °C / 105 °CMounting :
Aperture Φ40.5mmWeight :
251gMOQ :
100
|
Electrical data(Ta=25℃±5℃) |
|
Type Parameter |
TDC10EB |
TDC20EB |
TDC30EB |
TDC40EB |
TDC50EB |
Unit |
|
Rated current(Ipn) |
±10 |
±20 |
±30 |
±40 |
±50 |
mA |
|
Measure range(Ip) |
±15 |
±30 |
±45 |
±60 |
±75 |
mA |
|
Turns ratio(Np/Ns) |
1:50 |
1:100 |
1:150 |
1:200 |
1:250 |
T |
|
Rated output voltage |
@Ip=±Ipn ±5±1% |
V |
||||
|
Supply voltage |
±12--±15±5% |
V |
||||
|
Consumption current |
20+IpX(Np/Ns) |
mA |
||||
|
Offset voltage |
@Ip=0 ≤±50 |
mV |
||||
|
Offset voltage drift |
@ -40℃～85℃ ≤±1.5 |
mV/℃ |
||||
|
Linearity |
@Ip=0-±Ipn ≤1 |
%FS |
||||
|
Response time |
≤200 |
mS |
||||
|
Galvanic isolation |
@ 50HZ,AC,1min 2.5 |
KV |
||||
*Product updates, iterations, and parameter changes will not be notified separately
|
Applications |
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
|
Mechanical dimension(for reference only) |
Remarks：
1. All dimensions are in mm.
2. General tolerance ±1mm.
|
Directions for use |
1. When the current will be measured goes through a sensor, the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor).
2. The output amplitude of the sensor can be adjusted according to users’ requirements.
3. Custom design in the different rated input current and the output voltage are available.
|
urther Note |
L/T: Large quantity in 14 days
customized: Support OEM/ODM, Laser marking, Packing
Warranty: 2.5 years
After-sale service: within 24 hours
|
Packing and Shipment |
Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy 
Network Supported
