Hall Effect Current Sensor

Products

Home Closed Loop Voltage sensor

TBV-ADA2420 Hall Effect Voltage Transmitter

Closed Loop Current Sensor
Current Sensor
Current Sensor Factory
Current Sensor Manufacturer

TBV-ADA2420 Hall Effect Voltage Transmitter

TBV-ADA2420  series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±50or ±500V It has 0.5% accuracy, very reliable. Available for appearance customization.

  • Technology :

    Closed loop Hall effect
  • Max. Nominal Value :

    ±500V
  • Max. Measuring Range :

    ±1000V
  • Output Signal :

    20mA
  • Supply Voltage :

    12/24±5%
  • Accuracy :

    0.5%
  • Op. Temperature :

    -40 °C / 105 °C
  • Mounting :

    PCB
  • Weight :

    21g
  • MOQ :

    100
  • Description

 

Electrical data(Ta=25℃±5℃)

 

Type

Parameter

TBV50

ADA2420

TBV100

ADA2420

TBV200

ADA2420

TBC300

ADA2420

TBV400

ADA2420

TBV500

ADA2420

Unit

Rated input (AC Vpn)

50

100

200

300

400

500

V

Measure range(ACVp)

100

200

400

600

800

1000

V

Rated output (DC Isn)

0-20

mA

Turns ratio(Np/Ns)

3333:1000

T

Rated input(Ipn)

3.0

mA

Supply voltage

12/24±5%

V

Consumption current

20+IpX(Np/Ns)+ Isn

mA

Zero current

±0.2

mA

Offset current drift

@ -40℃~+85℃                       ≤±0.005

mA/℃

Linearity

@Vp=0-Vpn                            ≤0.2

%FS

Response time

≤200

mS

Bandwidth

@-3dB                               40~5000

KHZ

Galvanic isolation

@ 50HZ,AC,1min                        2.5

KV

 

 

  *Product updates, iterations, and parameter changes will not be notified separately

 

 

Applications

 

AC variable speed drives and servo motor drives

Static converters for DC motor drives

Variable speed drives 

Power supplies for welding applications

Battery supplied applications

Uninterruptible Power Supplies (UPS)

Switched Mode Power Supplies(SMPS)

 

Mechanical dimension(for reference only)

 

 

Remarks:

1. All dimensions are in mm.

2. General tolerance ±1

 

Directions for use

 

1. When the current will be measured goes through a transmitter, the current will be measured at the output end.

(Note: The false wiring may result in the damage of the transmitter).

 2. Customs can adjust output amplitude of the transmitter by needs.

 3. Custom design in the different rated input current and the output voltage available.

 

Further Note

 

L/T: Large quantity in 14 days

customized: Support OEM/ODM, Laser marking, Packing

Warranty: 2.5 years

After-sale service: within 24 hours 

 

Packing and Shipment

 

 

Packing and Shipment

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

RELATED PRODUCTS

Voltega sensor
TBV10/20X Hall Effect Voltage Sensor
TBV10/20X series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. This series voltage sensor has rated current input in 10mA, upto 20mA. Considering resistance of primary coil and electrical isolation within measure range, this sensor is suitable for measuring voltage. It has 0.5% accuracy, very small, very reliable. Available for appearance customization.
5mA Voltage Sensor
TBV5/25A 10/25A Series Hall Effect Voltage Sensor
TBV5/25A,10/25A series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. This series voltage sensor has rated current input in 5mA and 10mA, meausre upto 14mA. Considering resistance of primary coil and electrical isolation within measure range, this sensor is suitable for measuring voltage. It has 0.5% accuracy, very small, very reliable. Available for appearance customization.
Closed Loop Voltage Sensor
TBV-AV 0.5% Accuracy Hall Effect Voltage Sensor
TBV-AV series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. This series voltage sensor has rated voltage input between 50V and 1000VA, meausre upto 2000V. It has 0.5% accuracy, very reliable. Available for appearance customization.
PCB Voltage Sensor
TBV-A25 Hall Effect Voltage Sensor
TBV-A25 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between 50V and 1000VA, meausre upto 2000V. It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBV05/10ASR3.3 Hall Effect Voltage Sensor
TBV05/10ASR3.3  series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±5.0or ±10mA It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor Factory
TBV-ASR5 Hall Effect Voltage Sensor
TBV-ASR5 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±5.0or ±10mA It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor Factory
TBV-ASR12 Hall Effect Voltage Transmitter
TBV-ASR12 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±50and ±500V It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBV-ASR24 Hall Effect Voltage Transmitter
TBV-ASR24 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±50and ±500vIt has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor
TBV-AS12 Hall Effect Voltage Transmitter
TBV-AS12 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±50and ±500v It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor
TBV-AS24 Hall Effect Voltage Transmitter
TBV-AS24 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±50and ±500v It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor Factory
TBV-AL25Hall Effect Voltage Sensor
TBV-AL25 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±300and ±1000v It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor
TBV-AJ25 Hall Effect Voltage Sensor
TBV-AJ25 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±100and ±2000v It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor Factory
TBV10/50LVA Mode Hall Effect Voltage Sensor
TBV10/50LVA  series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. This series voltage sensor has rated voltage input between 50V and 1000VA, meausre upto 2000V. It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBV-LV Hall Effect Voltage Sensor
TBV-LV series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±100and ±5000v It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor Factory
TBV-LV5 Hall Effect Voltage Sensor
TBV-LV5 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±200and ±6000v It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBV-ADA12 Hall Effect Voltage Transmitter
TBV-ADA12 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±50and ±500v It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor
TBV-ADA24 Hall Effect Voltage Transmitter
TBV-ADA24 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. This series voltage sensor has rated voltage input between 50V and 1000VA, meausre upto 1000V. It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor
TBV-ADA1220 Hall Effect Voltage Transmitter
 TBV-ADA1220 series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. This series voltage sensor has rated voltage input between 50V and 1000VA, meausre upto 1000V. It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBV-ADA2420 Hall Effect Voltage Transmitter
TBV-ADA2420  series voltage sensor is a closed loop device galvanic isolation between primary and secondary circuit, it can measure DC, AC and pulse voltage. The output from the voltage sensor can be expressed as a voltage by passing it through a resister. Input voltage can be expressed as a current by passing it through a input resister. This series voltage sensor has rated voltage input between±50or ±500V It has 0.5% accuracy, very reliable. Available for appearance customization.
More products uploading
More products uploading
More products uploading
Contact Us

Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City

Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
b f i t y

Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy Network Supported

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

home

products

Contact Us