Products
TBC-XN series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3 and ±100A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Technology :
Closed loop Hall effectMax. Nominal Value :
±100AMax. Measuring Range :
±150AOutput Signal :
±4VSupply Voltage :
±15±5%Accuracy :
0.5%Op. Temperature :
-40 °C / ±105°CMounting :
PCBWeight :
12gMOQ :
100
Electrical data((Ta=25℃±5℃,RL=2KΩ,CL=10000PF) |
Type Parameter |
TBC 03XN |
TBC 05XN |
TBC 10XN |
TBC 15XN |
TBC 20XN |
TBC 25XN |
TBC 30XN |
TBC 50XN |
TBC 60XN |
TBC 100XN |
Unit |
Rated input (Ipn) |
±3 |
±5 |
±10 |
±15 |
±20 |
±25 |
±30 |
±50 |
±60 |
±100 |
A |
Measuringrange(Ip) |
±9 |
±15 |
±30 |
±45 |
±60 |
±75 |
±90 |
±150 |
±150 |
±150 |
A |
Size of input pins |
ø 0.8 |
ø 0.8 |
ø 1.4 |
ø 1.4 |
ø 1.6 |
ø 1.6 |
ø 1.6 |
□6.38 ×1.2 |
□6.38 ×1.2 |
□6.38 ×1.2 |
mm |
Turns ratio(Np/Ns) |
7:2100 |
7:1750 |
2:2000 |
2:2000 |
1:2000 |
1:2500 |
1:2000 |
1:2000 |
1:2000 |
1:2000 |
T |
Inside resistance |
200±0.1% |
100±0.1% |
200±0.1% |
36±0.1% |
200±0.1% |
200±0.1% |
36±0.1% |
20±0.1% |
18±0.1% |
10±0.1% |
Ω |
Rated output |
@ Ip=±Ipn ±4±0.5% |
V |
|||||||||
Supply voltage |
±15±5% |
V |
|||||||||
Powerconsumption |
15+IpX(Np/Ns) |
mA |
|||||||||
Zero voltage |
≤±30 |
mV |
|||||||||
Offset drift |
@ -40~+85℃ ≤±0.5 |
mV/℃ |
|||||||||
Output drift |
@ -40~+85℃ ≤±0.5 |
mV/℃ |
|||||||||
Linearity |
@ Ip=0-±Ipn ≤0.1 |
%FS |
|||||||||
Response time |
@ Ip=Ipn, 50 A/µS ,10%-90% <1.0 |
μS |
|||||||||
Bandwidth |
@-3dB DC±100 |
KHz |
|||||||||
Galvanic isolation |
@ 50HZ,AC,1min 3.0 |
KV |
*Product updates, iterations, and parameter changes will not be notified separately
Applications |
Switched Mode Power Supplies (SMPS)
AC variable speed drives
Uninterruptible Power Supplies (UPS)
Electrical appliances
Battery supplied applications
DC motor drives
Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. Secondary pin size and tolerance: width:0.5±0.1mm;thickness:0.25±0.05mm
3. General tolerance ±1mm
Directions for use |
1.When the current will be measured goes through the primary pin of a sensor, the voltage will be measured at
the output end. (Note: The false wiring may result in the damage of the sensor).
2. Custom design in the different rated input current and the output voltage are available.
Further Note |
L/T: Large quantity in 14 days
customized: Support OEM/ODM, Laser marking, Packing
Warranty: 2.5 years
After-sale service: within 24 hours
Packing and Shipment |
Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City
Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy Network Supported