Products
TBC-TAS51 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±200 meansure range upto ±400A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Technology :
Closed loop Hall effectMax. Nominal Value :
±200AMax. Measuring Range :
±400AOutput Signal :
±1.0VSupply Voltage :
+5.0 ±2%Accuracy :
0.5%Op. Temperature :
-40 °C / ±105°CMounting :
Aperture20.2mmWeight :
65gMOQ :
100
Electrical data(Ta=25℃±5℃,RL=10KΩ,CL=4700PF) |
Type Parameter |
TBC- 10TAS51 |
TBC- 20TAS51 |
TBC- 50TAS51 |
TBC- 75TAS51 |
TBC- 100TAS51 |
TBC- 150TAS51 |
TBC- 200TAS51 |
Unit |
Rated input (Ipn) |
±10 |
±20 |
±50 |
±75 |
±100 |
±150 |
±200 |
A |
Measure range(Ip) |
±20 |
±40 |
±100 |
±150 |
±200 |
±300 |
±400 |
A |
Turns ratio(Np/Ns)) |
1:1000 |
1:1000 |
1:1500 |
1:1500 |
1:2000 |
1:1800 |
1:2000 |
T |
Internal resister |
25±0.1% |
12.5±0.1% |
7.5±0.1% |
5±0.1% |
5±0.1% |
3±0.1% |
2.5±0.1% |
Ω |
Rated output |
@Ip=±Ipn ±1.0±0.5% |
V |
||||||
Supply voltage |
+5.0 ±2% |
V |
||||||
Power consumption |
≤20+IpX(Np/Ns) |
mA |
||||||
Reference voltage |
+2.5±0.2% |
V |
||||||
Zero voltage |
@Ip=0 +2.5±0.2% |
V |
||||||
Zero voltage |
≤±5 |
mV |
||||||
MagneticOffsetvoltage |
≤±5 |
≤±3.0 |
mV |
|||||
Offset drift |
≤±0.2 |
≤±0.1 |
mV/℃ |
|||||
output drift |
≤±0.2 |
≤±0.1 |
mV/℃ |
|||||
Linearity |
@Ip=0-±Ipn ≤0.1 |
%FS |
||||||
Response time |
@50A/μS,10%-90% ≤0.5 |
μs |
||||||
Bandwidth |
@-3dB DC±100 |
KHZ |
||||||
Galvanic isolation |
@ 50HZ,AC,1min 2.5 |
KV |
*Product updates, iterations, and parameter changes will not be notified separately
Applications |
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Directions for use |
1. When the current will be measured goes through a sensor, the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
2. Customs can adjust Output amplitude of the sensor by needs.
3. Custom design in the different rated input current and the output voltage are available.
urther Note |
L/T: Large quantity in 14 days
customized: Support OEM/ODM, Laser marking, Packing
Warranty: 2.5 years
After-sale service: within 24 hours
Packing and Shipment |
Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City
Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy Network Supported