Products
TBC-SYHA series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5and ±50A, meansure range upto ±125A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Technology :
Closed loop Hall effectMax. Nominal Value :
±50AMax. Measuring Range :
±125AOutput Signal :
±20mASupply Voltage :
±15±5%Accuracy :
0.5%Op. Temperature :
-40 °C / ±105°CMounting :
PCBWeight :
11gMOQ :
100
Electrical data(Ta=25℃±5℃) |
Type Parameter |
TBC05SYHA |
TBC7.5SYHA |
TBC10SYHA |
TBC15SYHA |
TBC20SYHA |
TBC25SYHA |
TBC30SYHA |
TBC50SYHA |
Unit |
Rated input(Ipn) |
±5 |
±7.5 |
±10 |
±15 |
±20 |
±25 |
±30 |
±50 |
A |
Measuringrange(Ip) |
±15 |
±22.5 |
±30 |
±45 |
±60 |
±75 |
±90 |
±125 |
A |
Size of input pins |
ø 0.6 |
ø 0.8 |
ø 0.8 |
ø 1.0 |
ø 1.4 |
ø 1.4 |
ø 1.6 |
□1.6 ×1.5×2 |
mm |
Turns ratio(Np/Ns) |
5:1250 |
3:1125 |
3:1500 |
2:1500 |
1:1000 |
1:1250 |
1:1500 |
1:2500 |
|
Measuringresistance range |
100-300 |
Ω |
|||||||
Rated output (Isn) |
@ Ip=±Ipn ±20±0.5% |
mA |
|||||||
Supply voltage |
±15±5% |
V |
|||||||
Power consumption |
20+IpX(Np/Ns) |
mA |
|||||||
Zero current |
@ Ip=0 ≤±0.2 |
mA |
|||||||
Offset drift |
@ -40~+85℃ ≤±0.5 |
mA |
|||||||
Linearity |
@ Ip=0-±Ipn ≤0.1 |
%FS |
|||||||
Response time |
@ Ip=Ipn, 50 A/µS ,10%-90% <1.0 |
μS |
|||||||
Bandwidth |
@-3dB DC±100 |
KHz |
|||||||
Galvanic isolation |
@ 50HZ,AC,1min 5.0 |
KV |
*Product updates, iterations, and parameter changes will not be notified separately
Applications |
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. Secondary pin size and tolerance: width:0.5±0.1mm;thickness:0.25±0.05mm
3. General tolerance ±1mm.
Directions for use |
1. When the current will be measured goes through the primary pin of a sensor, the current will be measured at
the output end. (Note: The false wiring may result in the damage of the sensor).
2. Custom design in the different rated input current and the output current are available.
Further Note |
L/T: Large quantity in 14 days
customized: Support OEM/ODM, Laser marking, Packing
Warranty: 2.5 years
After-sale service: within 24 hours
Packing and Shipment |
Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City
Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy Network Supported