Products
TBC-HXS52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±10and ±50A, meansure range upto ±55A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Technology :
Closed loop Hall effectMax. Nominal Value :
±50AMax. Measuring Range :
±55AOutput Signal :
2.0VSupply Voltage :
+5±5%Accuracy :
0.5%Op. Temperature :
-40 °C / ±105°CMounting :
PCBWeight :
7gMOQ :
100
Electrical data(Ta=25℃±5℃) |
Type |
TBC10HXS52 |
TBC20HXS52 |
TBC30HXS52 |
TBC50HXS52 |
Unit |
Rated input(Ipn) |
±10 |
±20 |
±30 |
±50 |
A |
Measuring range(Ip) |
±11 |
±22 |
±33 |
±55 |
A |
Secondary Turns(Ns) |
1000 |
1000±2 |
1200±1 |
1000±1 |
T |
Internalmeasuringresister |
50±0.1% |
25±0.1% |
20±0.1% |
10±0.1% |
Ω |
Rated output voltage |
2.0±0.5% |
2.0±0.5% |
2.0±0.5% |
2.0±0.5% |
V |
Supply voltage |
+5±5% |
V |
|||
Power consumption |
15+Ip/Ns |
mA |
|||
Reference voltage |
+2.5±0.4% |
V |
|||
Zero voltage |
@ Ip=0 +2.5±0.4% |
V |
|||
Offset voltage drift |
@ -40~+105℃ ≤±0.2 |
mV/℃ |
|||
Output drift |
@ -40~+105℃ ≤±0.2 |
mV/℃ |
|||
Linearity |
@ Ip=0-±Ipn ≤0.1 |
%FS |
|||
Magnetic offset voltage |
@Ip=3XIpn-0 ≤±0.25 |
%Ipn |
|||
di/dt accurately followed |
>50 |
A/µS |
|||
Response time |
@100A/μS,10%-90% ≤500 |
nS |
|||
Bandwidth |
@-3dB DC±100 |
KHz |
|||
Galvanic isolation |
@ 50/60HZ,1min 3.5 |
KV |
*Product updates, iterations, and parameter changes will not be notified separately
Applications |
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Pin connections |
Item |
Turns |
Primary rated current |
Rated putout
|
Primary impedance |
PrimaryInductance |
Connect point |
Single Phase |
1 |
±6.0(±20,±30,±50) |
2.5±2.0±0.5% |
0.05 |
0.025 |
|
2 |
±3(±10,±15,±25) |
2.5±2.0±0.5% |
0.20 |
0.1 |
|
|
3 |
±1.5(±5,±7.5,±12.5) |
2.5±2.0±0.5% |
1.00 |
0.4 |
|
Directions for use |
1.When the current will be measured goes through a sensor ,the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor).
2. Custom design in the different rated input current and the output voltage available.
Further Note |
L/T: Large quantity in 14 days
customized: Support OEM/ODM, Laser marking, Packing
Warranty: 2.5 years
After-sale service: within 24 hours
Packing and Shipment |
Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City
Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy Network Supported