Products
TBC-ECseries current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25and ±100 meansure range upto ±300A. It has 0.5% accuracy, very small size,
very reliable. Available for appearance customization.
Technology :
Closed loop Hall effectMax. Nominal Value :
±100AMax. Measuring Range :
±300AOutput Signal :
±25mA,±50mASupply Voltage :
±12～±18VAccuracy :
0.5%Op. Temperature :
-40 °C / ±105°CMounting :
Aperture 8.5mmWeight :
15gMOQ :
100
|
Electrical data(Ta=25℃±5℃) |
|
Type Parameter |
TBC25EC |
TBC50EC |
TBC75ECH |
TBC100EC |
Unit |
|
Rated input (Ipn) |
±25 |
±50 |
±75 |
±100 |
A |
|
Measure range(Ip) |
±75（±18V，200Ω） |
±150(±18V，85Ω) |
±225(±18V，70Ω) |
±300(±18V，55Ω) |
A |
|
Turns ratio(Np/Ns) |
1:1000 |
1:1000 |
1:1500 |
1:2000 |
|
|
Coil resister |
21 |
21 |
32 |
45 |
Ω |
|
Measure resister with ±12V |
@±25Amax 400(max) |
@±50Amax 190(max) |
@±75Amax 180(max) |
@±100Amax 160(max) |
Ω |
|
@±75Amax 115(max) |
@±150Amax 45(max) |
@±225Amax 30(max) |
@±300Amax 15(max) |
Ω |
|
|
Measure resister with ±15V |
@±25Amax 530(max) |
@±50Amax 250(max) |
@±75Amax 235(max) |
@±100Amax 220(max) |
Ω |
|
@±75Amax 150(max) |
@±150Amax 65(max) |
@±225Amax 50(max) |
@±300Amax 35(max) |
Ω |
|
|
Rated output (Isn) |
±25±0.5%FS |
±50±0.5%FS |
±50±0.5%FS |
±50±0.5%FS |
mA |
|
Supply voltage |
±12～±18 |
V |
|||
|
Power consumption |
20+IpX(Np/Ns) |
mA |
|||
|
Offset current |
@Ip=0 ≤±0.2 |
mA |
|||
|
Offset drift |
@ -40℃～85℃ ≤±0.5（Typ）, ≤±0.75（Max）, |
mA |
|||
|
Linearity |
@Ip=0-±Ipn ≤0.1 |
%FS |
|||
|
Bandwidth |
@-3dB DC±100 |
KHz |
|||
|
Response time |
@100A/μS,10%-90% ＜1.0 |
μs |
|||
|
Galvanic isolation |
@ 50HZ,AC,1min 3 |
||||
*Product updates, iterations, and parameter changes will not be notified separately
|
Applications |
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
|
Mechanical dimension(for reference only) |
Remarks：
1. All dimensions are in mm.
2. General tolerance ±1.0mm
|
Directions for use |
1. Is will be in a forward direction when the Ip flows according to the direction of the arrowhead.
2.The primary conductor should be≤120℃.
3. The dynamic performance (di/dt and the response time)is the best when the primary hole is fully filled with the bus bar.
4. The primary turns should be at the top of the sensor for the best magnetic coupling.
5. When the current will be measured goes through a sensor, the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
6. Custom design in the different rated input current and the output current are available.
|
urther Note |
L/T: Large quantity in 14 days
customized: Support OEM/ODM, Laser marking, Packing
Warranty: 2.5 years
After-sale service: within 24 hours
|
Packing and Shipment |
Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy 
Network Supported
