Products
TBC-BXS series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Technology :
Closed loop Hall effectMax. Nominal Value :
±300AMax. Measuring Range :
±900AOutput Signal :
±50mA, ±100mASupply Voltage :
±12~±18VAccuracy :
0.5%Op. Temperature :
-40 °C / ±105°CMounting :
Aperture 20.5x10.5mmWeight :
40gMOQ :
100
Electrical data(Ta=25℃±5℃) |
Type Parameter |
TBC50 BXS |
TBC100 BXS |
TBC150 BXS |
TBC200 BXS |
TBC300 BXS |
Unit |
Rated input (Ipn) |
±50 |
±100 |
±150 |
±200 |
±300 |
A |
Measure range(Ip) |
±150 (±18V,90Ω) |
±300 (±18V,30Ω) |
±450 (±18V,22Ω) |
±600 (±18V, 20Ω) |
±900 (±18V,5Ω) |
A |
Turns ratio(Np/Ns) |
1:1000 |
1:1000 |
1:1500 |
1:2000 |
1:3000 |
T |
Rated output(Isn) |
50±0.5% |
100±0.5% |
100±0.5% |
100±0.5% |
100±0.5% |
mA |
Coil resister @70℃ |
20 |
20 |
30 |
30 |
50 |
Ω |
Supply voltage |
±12 ~±18 |
V |
||||
Power consumption |
≤20+IpX(Np/Ns) |
mA |
||||
Zero offset |
@Ip=0 ≤±0.2 |
mA |
||||
Zero drift |
@ -40~+85℃ ≤±0.3(Typ), ≤±0.75(Max) |
mA |
||||
Linearity |
@Ip=0-±Ipn ≤0.1 |
%FS |
||||
Bandwidth |
@-3dB DC±100 |
KHz |
||||
Response time |
@50A/μS,10%-90% ≤1 |
μS |
||||
Galvanic isolation |
@ 50HZ,AC,1min 3 |
KV |
*Product updates, iterations, and parameter changes will not be notified separately
Applications |
AC variable speed drives
Static converters for DC motor drives
Variable speed drives
Power supplies for welding applications
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Switched Mode Power Supplies(SMPS)
Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
Directions for use |
1. When measure current flows according to the direction of the arrowhead, Output terminal gets the same phase current.
2. When the current will be measured goes through a sensor, the current will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
3. Custom design in the different rated input current and the output current are available.
Further Note |
L/T: Large quantity in 14 days
customized: Support OEM/ODM, Laser marking, Packing
Warranty: 2.5 years
After-sale service: within 24 hours
Packing and Shipment |
Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City
Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy Network Supported