Hall Effect Current Sensor

Products

Home Closed Loop Current Sensor

TBC- AP Series Closed Loop Mode

Closed Loop Current Sensor
Current Sensor
Current Sensor Factory

TBC- AP Series Closed Loop Mode

TBC-AP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±25and ±200A, meansure range upto ±600A. It has 0.5% accuracy,  very reliable. Available for appearance customization.

  • Technology :

    Closed loop Hall effect
  • Max. Nominal Value :

    ±200A
  • Max. Measuring Range :

    ±600A
  • Output Signal :

    25mA
  • Supply Voltage :

    ±12~±18 V
  • Accuracy :

    0.5%
  • Op. Temperature :

    -40 °C / ±105°C
  • Mounting :

    Aperture Φ16.2mm
  • Weight :

    25g
  • MOQ :

    100
  • Description
 

 

El ectri cal data( Ta=25 ℃±5℃)

 

Type

Parameter

 

TBC25AP

 

TBC50AP

 

TBC100AP

 

TBC200AP

 

Unit

Rated input(Ipn)

 ±25

 ±50

 ±100 

 ±200

 A

Measure range(Ip)

±75(±18V, 

    200Ω) 

±150(±18V,

     80Ω)

±300(±18V,

    65Ω)

±600(±18V,

     10Ω)

 

A

Turns ratio(Np/Ns)

 1:1000

 1:1000

 1:2000

 1:2000

 

Coilresister

 20  

 20 

 40  

 40  

 Ω

Rated output (Isn)

 25±0.5%

 50±0.5%

 50±0.5%

 100±0.5%

 mA

Supplyvoltage

 ±12~±18

 V

Power consumption

 20+IpX(Np/Ns)

 mA

Offsetcurrent

 @Ip=0 ≤±0.2

 mA

Offset current drift

 @ -40~+85℃ ≤±0.5

 mA

Linearity

 @Ip=0-±Ipn ≤0.1

 %FS

Bandwidth

@-3dB                           DC±100

KHz

Response time

 @100A/μS,10%-90% ≤1

 µs

Galvanic isolation

 @ 50HZ,1min 3.0

KV

 

 

*Product updates, iterations, and parameter changes will not be notified separately

 

Applications

 

AC variable speed drives and servo motor drives

Static converters for DC motor drives

Variable speed drives  

Power supplies for welding applications

Battery supplied applications

Uninterruptible Power Supplies (UPS)

Switched Mode Power Supplies (SMPS)

 

 

Mechanical dimension(for reference only)

  

 

 

 

 

 

Remarks:

1. All dimensions are in mm.

2. General tolerance ±1mm.

 

Directions for use

 

1.When measure current flows according to the direction of the arrowhead, Output terminal gets the same phase current.

 2. The primary conductor should be≤120℃.

 3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.

 4.The primary turns should be at the top of the sensor for the best magnetic coupling.

 5.When the current will be measured goes through a sensor, the voltage will be measured at the output end.

      (Note: The false wiring may result in the damage of the sensor)

 6. Custom design in the different rated input current and the output current are available.

 

Further Note

 

L/T: Large quantity in 14 days

customized: Support OEM/ODM, Laser marking, Packing

Warranty: 2.5 years

After-sale service: within 24 hours 

 

Packing and Shipment

 

 

Packing and Shipment

 

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

RELATED PRODUCTS

Hall Current Sensor
TBC-RC512 Closed Loop Hall Effect Current Sensor
TBC-RC512 series current sensor is a closed loop device provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between 0.5 and 3A, meansure range upto 4.8A. It has 2% accuracy, very small size, very reliable. Available for appearance customization.
20A Current Sensor
TBC-A02 Closed Loop Hall Effect Current Sensor
The TBC- A02 series current sensor is a closed loop device provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between 0.5 and 20A, meansure range upto 60A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-A05 Multi-range Closed Loop Hall Effect Current Sensor
TBC-A05 series current sensor is a Multi-range closed loop device provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input in 25A and 35A, meansure range upto 50A and 70A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacture
TBC-C04 Multi-range Closed Loop Hall Effect Current Sensor
TBC-C04 series current sensor is a Multi-range closed loop device provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input in 25A and 50A, meansure range upto 55A and 100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
25A Current Sensor
TBC-C104/204 Multi-range Closed Loop Mode Hall Effect Current Sensor
TBC-C104/204 Current Sensor is a Multi-range closed loop device provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input in 25A and 50A, meansure range upto 55A and 100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacture
TBC-CQ1 Closed Loop Hall Effect Current Sensor
TBC-CQ1 series current sensor has strong anti-jamming ability and it provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between 15A and 75A, meansure range upto 150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-DT Closed Loop Hall Effect Current Sensor
TBC-DT series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±15 and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-DT3.3 Closed Loop Hall Effect Current Sensor
TBC-DT3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6and ±50 meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-DT52 Closed Loop Hall Effect Current Sensor
TBC-DT52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50 meansure range upto ±55A. It has 1% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-DT565 Closed Loop Hall Effect Current Sensor
TBC-DT565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50 meansure range upto±120A. It has0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-DHT Closed Loop Hall Effect Current Sensor
TBC-DHT series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±15 and ±50 meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-DHT3.3 Closed Loop Hall Effect Current Sensor
TBC-DHT3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50 meansure range upto ±100A. It has 0.8% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-DHT52 Closed Loop Hall Effect Current Sensor
TBC-DHT52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50 meansure range upto ±55A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-D Multi-range Closed Loop Hall Effect Current Sensor
TBC-D series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25 and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-DS3.3 Multi-range Closed Loop Hall Effect Current Sensor
TBC-DS3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
BC-DS5 Multi-range Closed Loop Hall Effect Current Sensor
TBC-DS5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50 meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-DSR5 Multi-range Closed Loop Hall Effect Current Sensor
TBC-DSR5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-DSR3.3 Multi-range Closed Loop Mode Hall Effect Current Sensor
TBC-DSR3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-DHS5 Multi-range Closed Loop Hall Effect Current Sensor
TBC-DHS5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-DHS52 Multi-range Closed Loop Hall Effect Current Sensor
TBC-DHS52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±55A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-DHS3.3 Multi-range Closed Loop Hall Effect Current Sensor
TBC-DHS3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-DHSR3.3 Multi-range Closed Loop Hall Effect Current Sensor
BC-DHSR3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
BC-DHSR52 Multi-range Closed Loop Hall Effect Current Sensor
BC-DHSR52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±55A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-DHSR5 Multi-range Closed Loop Hall Effect Current Sensor
TBC-DHSR5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-LXH Two-closed Loop High Precision Hall Effect Current Sensor
TBC-LXH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±5 and ±75A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-LXA Two-closed Loop Hall Effect Current Sensor
TBC-LXH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±6 and ±50A, meansure range upto ±120A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-P Two-closed Loop Hall Effect Current Sensor
TBC-P series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3 and ±30A, meansure range upto ±90A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-PH Two-closed Loop Hall Effect Current Sensor
TBC-PH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3 and ±30A, meansure range upto ±90A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-PS3.3 Two-closed Loop Mode Hall Effect Current Sensor
TBC-PS3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5 and ±30A, meansure range upto ±60A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-PHS3.3 Two-closed Loop Hall Effect Current Sensor
TBC-PHS3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5 and ±30A, meansure range upto ±60A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-PS3.3T Two-closed Loop Hall Effect Current Sensor
TBC-PS3.3T series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5 and ±30A, meansure range upto ±33A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-PHS3.3T Two-closed Loop Hall Effect Current Sensor
TBC-PHS3.3T series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5 and ±30A, meansure range upto ±33A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-PS5 Two-closed Loop Hall Effect Current Sensor
TBC-PS5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5 and ±30A, meansure range upto ±90A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-PHS5 Two-closed Loop Hall Effect Current Sensor
TBC-PHS5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5 and ±30A, meansure range upto ±90A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-PXH Two-closed Loop Hall Effect Current Sensor
BC-PXH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3 and ±50A, meansure range upto ±125A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-PX5 Two-closed Loop Hall Effect Current Sensor
BC-PX5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3 and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-XD closed Loop Hall Effect Current Sensor
TBC-XD series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3 and ±50A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-XN High Precision Closed Loop Hall Effect Current Sensor
TBC-XN series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3 and ±100A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC- XNP High Precision Closed Loop Hall Effect Current Sensor
TBC-XNP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between 50and 100A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-SYH High Precision Closed Loop Hall Effect Current Sensor
TBC-SYH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3and ±50A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-SYHA Two-closed Loop Hall Effect Current Sensor
TBC-SYHA series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±5and ±50A, meansure range upto ±125A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-SYH52 High Precision Closed Loop Hall Effect Current Sensor
TBC-SYH52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3and ±50A, meansure range upto ±55A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-SYH565 High Precision Closed Loop Hall Effect Current Sensor
TBC-SYH565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between ±3and ±50A, meansure range upto ±150A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-HXS5 Multi-range Closed Loop Hall Effect Current Sensor
TBC-SYH565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±10and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-HXS51 Multi-range Closed Loop Hall Effect Current Sensor
TBC-SYH565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±10and ±50A, meansure range upto ±100A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-HXS52 Multi-range Closed Loop Hall Effect Current Sensor
TBC-HXS52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±10and ±50A, meansure range upto ±55A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-LAH Closed Loop Hall Effect Current Sensor
TBC-HXS52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±25and ±100A, meansure range upto ±280A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-LAS5 Closed Loop Hall Effect Current Sensor
TBC-LAS5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±100A, meansure range upto ±250A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-LSR508 Closed Loop Hall Effect Current Sensor
TBC-LAS5R508 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±6and ±50A, meansure range upto ±125A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-LSR335 Closed Loop Hall Effect Current Sensor
TBC-LSR335 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.It has strong anti-jamming ability.This series current sensor has rated current input between  ±6and ±50, meansure range upto ±125A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC- AP Series Closed Loop Mode
TBC-AP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±25and ±200A, meansure range upto ±600A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-AP2 Closed Loop M Hall Effect Current Sensor
TBC-AP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±25and ±100A, meansure range upto ±200A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor
TBC-APF Closed Loop Hall Effect Current Sensor
TBC-APF series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±100and ±200A, meansure range upto ±600A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor
TBC-APSR52 Closed Loop Hall Effect Current Sensor
TBC-APSR565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±150A, meansure range upto ±300A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-TP Closed Loop Hall Effect Current Sensor
TBC-TP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±200A, meansure range upto ±600A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor Factory
TBC-TPF Closed Loop Hall Effect Current Sensor
TBC-TPF series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±200A, meansure range upto ±600A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor
TBC-APT Closed Loop Hall Effect Current Sensor
TBC-APT series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±100and ±230A, meansure range upto ±600A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Closed Loop Current Sensor
BC-APS51 Closed Loop Hall Effect Current Sensor
TBC-APTS51 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±150A, meansure range upto ±300A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor Factory
TBC-APS565 Closed Loop Hall Effect Current Sensor
TBC-APTS51 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±150A, meansure range upto ±300A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-APS52 Closed Loop Hall Effect Current Sensor
TBC-APS52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±150A, meansure range upto ±165A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-APSR51 Closed Loop Hall Effect Current Sensor
TBC-APSR51 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±150A, meansure range upto ±300A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor
TBC-APSR565 Closed Loop Hall Effect Current Sensor
TBC-APSR565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±50and ±150A, meansure range upto ±300A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Current Sensor Factory
TBC- LP Closed Loop Hall Effect Current Sensor
TBC-LP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents.This series current sensor has rated current input between ±100and ±200A, meansure range upto ±600A. It has 0.5% accuracy,  very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-LP2 Closed Loop Hall Effect Current Sensor
TBC-DT3.3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±100and ±125 meansure range upto ±200A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-LPT-2 Closed Loop Hall Effect Current Sensor
TBC-LPT-2 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±125and ±200 meansure range upto ±600A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-LPT -1 Closed Loop Hall Effect Current Sensor
TBC-LPT-1 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between 125Aand 200A meansure range upto ±600A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC400BST Closed Loop Hall Effect Current Sensor
TBC400BST series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±400A meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-BS Closed Loop Hall Effect Current Sensor
TBC-BS series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
BC-BSW Closed Loop Hall Effect Current Sensor
TBC-BSW series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-BA Closed Loop Hall Effect Current Sensor
TBC-BA series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-BR Closed Loop Hall Effect Current Sensor
TBC-BR series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-BTS Closed Loop Hall Effect Current Sensor
TBC-BTS series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-BTS4V Closed Loop Hall Effect Current Sensor
TBC-BTS4V series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±600A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-BTR Closed Loop Hall Effect Current Sensor
TBC-BTR series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-BXS Closed Loop Hall Effect Current Sensor
TBC-BXS series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-BXR Closed Loop Hall Effect Current Sensor
TBC-BXR series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-BP Closed Loop Hall Effect Current Sensor
TBC-BP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC- BPR51 Closed Loop Hall Effect Current Sensor
TBC-BPR51 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±200 meansure range upto ±360A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor
TBC-BPR565 Closed Loop Hall Effect Current Sensor
TBC-BPR565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±200 meansure range upto ±360A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-F Closed Loop Hall Effect Current Sensor
TBC-F series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±200and ±500 meansure range upto ±1500A. It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor Factory
TBC-FR Closed Loop Hall Effect Current Sensor
TBC-FR series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±200and ±500 meansure range upto ±1500A. It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-E Closed Loop Hall Effect Current Sensor
TBC-E series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±500A. It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-EMA Closed Loop Hall Effect Current Sensor
TBC-EMA series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very reliable. Available for appearance customization.
Current Sensor
TBC-ECH High Precision Closed Loop Hall Effect Current Sensor
TBC-ECH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25and ±100 meansure range upto ±300A. It has 0.5% accuracy, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-EC Closed Loop Hall Effect Current Sensor
TBC-ECseries current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25and ±100 meansure range upto ±300A. It has 0.5% accuracy, very small size, very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-EH High Precision Closed Loop Hall Effect Current Sensor
TBC-EH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25and ±100 meansure range upto ±300A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-EHC Closed Loop Hall Effect Current Sensor
TBC-EHCseries current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25and ±100 meansure range upto ±300A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor Factory
TBC-EHD8 High Precision Closed Loop Hall Effect Current Sensor
TBC-EHD8 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25and ±100 meansure range upto ±200A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor Factory
BC-ES5 High Precision Closed Loop Hall Effect Current Sensor
TBC-ES5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±100 meansure range upto ±200A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-ECS5 Closed Loop Hall Effect Current Sensor
TBC-ECS5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±100 meansure range upto ±200A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor Factory
TBC-ECS52 Closed Loop Hall Effect Current Sensor
TBC-ECS52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±100 meansure range upto ±110A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor Factory
TBC-ECS565 Closed Loop Hall Effect Current Sensor
TBC-ECS565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±100 meansure range upto ±230A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor Manufacturer
TBC-ES52 High Precision Closed Loop Hall Effect Current Sensor
TBC-ES52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±100 meansure range upto ±110A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.  
Closed Loop Current Sensor
TBC-ES565 High Precision Closed Loop Hall Effect Current Sensor
TBC-ES565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±100 meansure range upto ±300A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-ECS5R Closed Loop Hall Effect Current Sensor
TBC-ECS5R series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±100 meansure range upto ±200A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-EP3 Three-phase High Precision Closed Loop Hall Effect Current Sensor
TBC-EP3 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±25and ±200 meansure range upto ±600A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor Factory
TBC-U Closed Loop Hall Effect Current Sensor
TBC-U series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±100and ±400 meansure range upto ±900A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-TAH High Precision Closed Loop Hall Effect Current Sensor
TBC-TAH series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±300 meansure range upto ±900A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-TAS51 High Precision Closed Loop Hall Effect Current Sensor
TBC-TAS51 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±200 meansure range upto ±400A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-TAS5 High Precision Closed Loop Hall Effect Current Sensor
TBC-TAS5 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±200 meansure range upto ±400A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-TAS52 High Precision Closed Loop Hall Effect Current Sensor
TBC-TAS52 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±2and ±100 meansure range upto ±110A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-TAS565 High Precision Closed Loop Hall Effect Current Sensor
TBC-TAS565 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±10and ±150 meansure range upto ±400A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-LT /LR Closed Loop Hall Effect Current Sensor
TBC-LT/LR series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±100and ±300meansure range upto ±700A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-LTA5V-1 Closed Loop Mode Hall Effect Current Sensor
TBC-LTA5V-1 series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50nd ±400meansure range upto ±580A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-LTAR5V Closed Loop Hall Effect Current Sensor
TBC-LTAR5V  series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±50and ±400meansure range upto ±600A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Current Sensor
TBC-LTA Closed Loop Hall Effect Current Sensor
TBC-LTA series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor has rated current input between ±100and ±300meansure range upto ±900A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
Closed Loop Current Sensor
TBC-SP Closed Loop Hall Effect Current Sensor
TBC-SP series current sensor provides accurate electronic measurement of DC, AC or pulsed currents. This series current sensor meansure range upto ±1000A. It has 0.5% accuracy, very small size,very reliable. Available for appearance customization.
More products uploading
More products uploading
More products uploading
Contact Us

Add: NO.80 Feitian Avenue, Lukou Street, Jiangning District, Nanjing City

Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
b f i t y

Copyright @2023 Nanjing Token Electronics Science&Technology Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy Network Supported

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

home

products

Contact Us